The CNC 60 is the ideal
flat bed plug and play solution for milling larger parts
in 3 or 4 axes. It is available in a range of sizes to suit
a variety of applications. And it may be customised to suit
your specific needs. The CNC 60 allows access to move
around all sides of the machine to move the material about
and to clamp it to the bed. It is particularly well suited
to furniture making where large flat material is used. Industrially
proven in the prototyping, electronics, engraving & glue
laying markets, this machine is equally esteemed in the classroom.
Simple to operate and yet robust enough to cope with mistreatment
from any student.
The CNC 60 comes standard with 2-phase high torque
stepping motor for dry cutting of plastic, wood and model
board up to 80mm/sec. The CNC 60 also offers the high
performance servo driven control option for those with
more demanding requirements allowing to cut non-ferrous
metal up to 100 mm/sec (requires a PCI card for your computer).
The CNC 60 also comes standard with software to drive
the machine, and can be operated with a whole range of
CAD and CAM software using any Windows 98, 2000, XP computer
via serial cable.
Simply design your model on the computer (in any CAD software),
create your tool paths (with CAM software), and with the
push of a button drive your machine to do the cutting.
CNC 60 Highlights
Turn key system for drilling, milling,
engraving, dispensing, routing
Machines almost any non-ferrous material
Robust aluminium construction complete
with stand-alone control and power electronics
Direct control by Windows 98, 2000,
or XP Computer
Choose the control system that suits you best: Stepper
or Servo
Open system concept for a large number of applications
Buy 3 axis machine now and upgrade to 4 axis later
Interfaces with virtually any CAD
or CAM software
Versatile 3 axis gantry system with
precision T-slot clamping table
High accuracy ballscrew drive motion
Powered by standard wall outlet
(AC 230 V/50 Hz)
Does not require compressed air
Fully open machining area with access
to all sides and excellent viewing
Typical Applications
Furniture making
Rapid Prototyping
Drilling
Front Panel Parts
2D contour & pocket milling
Engraving PCB boards
Architectural Models
3D design models
Sign making
Cylindrical parts (with rotary axis)
Glue laying
Machine Specifications:
Machine
Construction:
Sturdy Aluminium/steel
bolted together construction
Machine
Configurations:
3 or 4 axis gantry
system
Spindle
Motor Options:
UFM
500W spindle motor (11,000 to 25,000 RPM; collet range
3mm - 1/4 inch)
UFM 1050W spindle motor (11,000 to 25,000 RPM; collet range 3mm -
8mm)
Linear
Guides:
Precision
ground steel shafts with linear ball bearings
4th
axis 
