Specifically designed for every method of laser marking. The high extraction rate and vacuum coupled with unsurpassed filter capacity and design makes premature filter skinning or blocking, a thing of the past. The unit can be modified for PVC processing with an additional upgrade that incorporates a unique HCL gas monitor.
The 180 is the best extraction unit
for the Xenetech 1325 laser (the smaller model).
Unit options
24v Stop/Start via Laser - Allows the extractor to start and stop in sequence with laser
VOC Indicator - Alerts you when Volatile Organic Compounds are getting through the gas filter
Dual Voltage/Frequency - Ideal for OEM’s who will be selling extractors with their lasers worldwide
PVC upgrade - To be used when processing PVC. Includes ACID proofing internal contact parts, VOC monitoring and specific HCL monitor
System Failure Signal - Signals laser in the event of a failure within the extractor
Filter Blocked Signal - Signals laser when filters need replacing
Particulate Monitoring - Signals if particulate is detected
Unit
Specifications
Carcass
Main body, central support, lid and base are 304 grade brushed stainless steel
Standard Equipment
• 3 year warranty
• Industrial grade castors, two lockable
• Integral silencer
• Filter blocked indicator light
• Sound level below 60dba
• Standard filter set (see below)
• 50mm diameter inlet
• Corrosion resistant carcass
• IP56 enclosure
• Weight: 60kg
Electrics
• 230v 1ph 50/60hz or 110v 60/50hz
• 3 metres hard wired power cable
• Illuminated 8A trip ON/OFF switch
• PolyLog™ Materials Management
• Full load current: 6 amps
Blower/Pump
• 20,000 hours life
• 0.8kW output
• Airflow 180m3/hr (with filter fitted)
• IP54 synchronous (brushless) motor
Standard Filter Set
Mini pleat two stage pre filter
95% efficiency at 0.8 micron, 9m2 of surface area
Combined filter
99.997% efficiency at 0.3 micron HEPA
Activated Carbon impregnated with potassium permanganates
Filter Life Guide
Mini Pleat
Combined
Glass
9-12 Months
12 Months
Paper/Wood/Ceramic/Acetate/Cellulose
9-12 Months
9-12 Months
Metal
9-12 Months
12 Months
PET/PP/PE/Epoxy/EPDM/Rubber
4-6 Months
6-9 Months
Ink Printed/Painted
4-6 Months
6-9 Months
PVC
4-6 Months
6-9 Months
* This chart is a guide only, factors such as character height, amount of characters and depth of the mark will have an effect on the life of the filter.
BOFA 350 
